Brutale 1000 / Dragster 800 - Internationale kentekenplaathouder

Brutale 1000 / Dragster 800 - Internationale kentekenplaathouder

$399.95
Ga direct naar de productinformatie
Brutale 1000 / Dragster 800 - Internationale kentekenplaathouder

AB Moto

Brutale 1000 / Dragster 800 - Internationale kentekenplaathouder

7 recensies

$399.95
Verzendkosten worden berekend bij de checkout.

Op voorraad

Extra opties

Kies de verplichte opties voordat je dit product aan je winkelwagen toevoegt.

Basisproduct
$399.95
Totaalprijs
$399.95

Extra producten worden als aparte artikelen aan je winkelwagen toegevoegd.

Internationale klanten

AB Moto is een bedrijf gevestigd in de Verenigde Staten. Invoerrechten en belastingen (zoals btw) zijn niet inbegrepen. Ze worden aan de vervoerder betaald — afhankelijk van je land vóór de levering of bij ontvangst. Zie de FAQ of het tabblad Verzendinformatie hieronder voor meer informatie.

Invoerkosten voor worden geschat…

Deze kentekenplaathouder is, op de kentekenhouder na, volledig gemaakt van billet aluminium en is ontworpen om te voldoen aan de hoge esthetische normen van MV Agusta. Hij is geschikt voor internationale en Amerikaanse kentekenplaten en voldoet aan de eisen voor de afstand tussen de knipperlichten. De kit biedt ook de keuze uit twee maten kentekenhouder en een optioneel verlengstuk van billet aluminium om te voldoen aan de eis van een hoek van 30° voor de kentekenhouder.

Let op: deze kit past alleen bij knipperlichten met M8-schroefdraad. OEM-knipperlichten zijn niet compatibel en er worden geen knipperlichten meegeleverd.

Zie de foto's voor de hoeken en afmetingen van de kentekenhouders.

Kellerman i.NEX V4 (3-4V) is nodig om snel knipperen van aftermarket verlichting van 12 volt te voorkomen.

Inhoud van de verpakking

1-Fender Eliminator

1-License bracket of choice

1-License light

1-Pair of short titanium pinch bolts

Add On:

Billet Extension

SIGNALS NOT INCLUDED

Geschikte motoren

MV Agusta

Handleidingen
Reviews (7)

Customer Reviews

Based on 7 reviews
100%
(7)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Ju4n J4vi3r
How the bike should have been out of the factory.

The final result absolutely makes the efforts to install it worth it. 

It's a big job, though. Probably gonna take you a full day. The installation manual is doing a decent job of guiding you, though having the pictures at each step and not grouped at the bottom might have helped. I recommend you take pictures and group the screws with each part. 

That being said, the end result is simply awesome!

A
Alex B
A bigger job than you may realise, but not too difficult.

So, I fitted the billet extension and large plate holder.
You have to remove the wheel, remove the belly pan, pipe(s) cat, exhaust valve servo, disassemble the seat and then reroute wires before reassembling.
If using the billet arm, I would extend the wires for the blinkers and plate light to give yourself freedom to work in the limited space between the seat tub and the rear light assembly.
Use strong loctite on the billet arm bolts because there is obviously some moment on the arm and they nearly worked themselves free after my shakedown ride using only blue loctite.
I used Rizoma blinkers and had to rebuild to take account for all the resistors I had to add to get the lights working right - and then squeezing them all in under the seat along with the quadlock charger unit.

All in all the kit is beautifully made, but quite involved to fit. The good news is that disassembling the bike made me replace a bunch of old fittings while I was under there, and clean in some places that aren't normally accessible.

W
Wayne

Quick delivery and a quality product.

K
K.c.
Tail tidy dragster 800 re rc

Fitted this tail tidy to my 2024 dragster 800 RC. Seriously great product well made easy to fit. I couldn’t find a nice tail tidy untill I found this. Look no further guys this is the one to have. I’m in the uk and shipping was quick and only £19.97 customs fee. Only down side is the indicators flash fast so think I need a resistor but they look stunning with the perfect it in the recess of the back light. Top product keep up the fantastic work guys.

P
Paul Rawson
Awesome!

I don’t think I have ever used the term Awesome for a product review before, but this one certainly deserves it.
From the moment I received the tail tidy I was impressed, even the packaging shows an attention to detail I have never seen before and the product does not let you down. The pieces of the tidy are incredibly well made and suit the style of the bike brilliantly. Even the replacement bolts look good.
When I looked at the instructions I have to admit I was a little intimidated, it looked a really big job. But the instructions are really detailed and make sense and the pictures REALLY helped. I did the work in two sets, each about 4 hours, first the exhaust system and cabling, then the plastics and rear frame..
It is is fiddly work, so take your time and be prepared for close up work in and under the bike (have a solid paddock stand or rigid frame stand to make sure your bike is secure). You don’t need loads of tools, mostly a hex key set, and Phillips screw drivers. I didn’t need to take the rear wheel off, but it did make it a bit more fiddly.
I’m no mechanic, but I have a basic understanding and I didn’t find it difficult, just time consuming. It even uses the original indicators and plate light to make life easier!
Brilliant product and well worth the money. Really pleased.

Verzendinformatie

Fulfillment Time

As a one-person operation, I handle every aspect of the business myself, including product design, marketing, packing, and shipping. This allows for a personal touch but means fulfillment times can vary based on current order volume and demand. Typically, orders are processed and shipped within 1-4 business days. I appreciate your patience and understanding—rest assured, I'm committed to getting your items to you as quickly as possible! If you have any questions about your order status, feel free to reach out.

International Shipping

For international orders, please note that our US-based store is not responsible for any customs duties, taxes, or VAT charges that may be applied by your country's customs service. These fees are not included in your order total. They are determined by your local government, are the sole responsibility of the customer and are paid to the carrier. Depending on the destination country, the carrier collects them before delivery or on receipt (UPS sometimes delivers first and bills you afterwards). We recommend checking with your local customs office for more information before placing your order.

Order Cancellation

Orders may be canceled before they are shipped. Once an order has shipped, cancellations are not permitted. For returns, please contact support@abmoto.store.

Misschien ook iets voor jou